未找到活动
- 男性
- 社交链接
- 他是
-
Decadurabolin Sustanon Y Winstrol Deca Durabolin Effet Secondaire
**Deca‑Durabolin (Nandrolone Decanoate)**
*A quick guide to what it is, how it’s used medically, and the key side‑effects you should know.*
---
## 1. What Is Deca‑Durabolin?
| Feature | Details |
|---------|--------|
| **Generic name** | Nandrolone decanoate |
| **Common brand names** | Deca‑Durabolin, Decadron, Nandrolone |
| **Drug class** | Anabolic steroid (synthetic derivative of testosterone) |
| **Legal status** | Prescription‑only in most countries; classified as a controlled substance (Schedule IV in the U.S.) |
### How It Works
- Binds to androgen receptors → stimulates protein synthesis and nitrogen retention.
- Promotes muscle growth, bone density, and erythropoiesis (red blood cell production).
- Has lower affinity for aromatase → minimal estrogenic conversion.
---
## 3. Approved Uses
| Indication | Why Deca‑Durabolin Is Prescribed |
|------------|-----------------------------------|
| **Anemia** (especially in chronic kidney disease) | Enhances erythropoietin production and red blood cell mass. |
| **Muscle wasting disorders** (e.g., HIV, cancer cachexia) | Provides anabolic support to counteract catabolism. |
| **Osteoporosis / bone loss** | Increases bone mineral density by stimulating osteoblast activity. |
| **Chronic diseases causing weight loss** | Improves appetite and protein synthesis, aiding in recovery. |
> *Note:* The drug is usually combined with a short‑acting anabolic steroid to provide immediate benefits while the long‑acting nandrolone continues to exert its effects.
---
## 3. What Makes It "Stabilizing" for the Body?
| Feature | Why it helps |
|---------|--------------|
| **Long half‑life (≈ 12 days)** | Sustained drug levels reduce peaks and troughs, preventing sudden withdrawal or overload that can upset metabolism. |
| **Slow release** | Allows the body to gradually adjust hormone levels rather than reacting to abrupt changes; this is especially useful after major physiological stress like surgery or injury. |
| **Reduced side‑effects** | With lower peak concentrations, there’s less risk of liver toxicity, gynecomastia, hair loss, and other androgen‑related side‑effects compared to drugs with short half‑life that require frequent dosing. |
| **Stable anabolic support** | Continuous muscle protein synthesis keeps the body in a growth‑friendly state, preventing catabolism during periods of decreased activity or increased recovery demands. |
### 4. Clinical Implications – When and Why to Use
| Situation | Rationale for Long‑Half‑Life Testosterone | Typical Example |
|-----------|------------------------------------------|-----------------|
| **Post‑operative recovery** (e.g., after prostatectomy) | Provides steady anabolic support while minimizing hormonal fluctuations that could affect wound healing. | 4–6 weeks of therapy with a long‑acting preparation. |
| **Muscle wasting in chronic disease or aging** | Continuous hormone exposure helps preserve muscle mass, reduces fatigue, and improves functional capacity. | 3–12 months of maintenance dosing for sarcopenia. |
| **Reproductive endocrinology** (e.g., low testosterone with fertility concerns) | Steady levels help maintain spermatogenesis without inducing abrupt spikes that could suppress gonadotropins. | Low-dose long‑acting formulations. |
| **Anabolic performance enhancement** | Lower frequency of injections reduces injection-related pain and potential site complications while maintaining a stable anabolic stimulus. | Elite athletes may use extended‑interval protocols for convenience and reduced side‑effects. |
---
## 4. Practical Considerations & Potential Drawbacks
| Issue | Explanation | Mitigation |
|-------|-------------|------------|
| **Depot Stability** | Long‑acting formulations rely on slow hydrolysis of the fatty acid ester; premature breakdown can cause "burst" release. | Use proven commercial preparations; avoid excessive mechanical agitation before injection. |
| **Injection Site Reactions** | Lipophilic depot may accumulate at the injection site causing granulomas or nodules, especially with repeated injections in a limited area. | Rotate sites (abdomen, thigh), use proper aspiration technique to avoid intramuscular placement if subcutaneous is desired. |
| **Dosing Accuracy** | Small changes in ester chain length can significantly affect half‑life; batch-to-batch variability may occur. | Calibrate dose based on pharmacokinetic data; monitor plasma levels where possible. |
| **Drug–Drug Interactions** | Co-administered hydrophobic drugs could alter microsomal enzyme activity, affecting metabolism of the depot drug. | Evaluate potential interactions and adjust doses accordingly. |
---
### 3. How to Choose a "Right" Drug
Below is a practical framework for selecting a drug that will behave as an ideal sub‑cutaneous depot.
| Step | What to Do | Why |
|------|------------|-----|
| **1. Identify Therapeutic Goal** | *Acute vs. chronic*? *Dose frequency acceptable?* | Determines required release profile (fast onset, sustained release). |
| **2. Check Physicochemical Properties** | • LogP ≈ 3–5
• MW >400 Da
• Solubility ≤ 0.01 mg/mL in water | Ensures poor diffusion through plasma; suitable for depot formation. |
| **3. Evaluate Metabolism & Stability** | • Not heavily metabolized by liver enzymes (avoid rapid clearance).
• Stable against hydrolysis/oxidation.
• Minimal efflux transporter affinity. | Guarantees that drug remains in circulation long enough to act locally. |
| **4. Examine Protein Binding** | Aim for moderate to high plasma protein binding (>80 %) but avoid extremes that impede diffusion from depot. | Balances retention at injection site with ability to diffuse into local tissue. |
| **5. Confirm Safety & Tolerability** | • Local irritation minimal.
• No systemic toxicity at expected concentrations.
• Reversible or negligible side effects. | Ensures clinical acceptability of the drug for local use. |
---
## 4. Practical Example – **Ketamine** (local anesthetic / analgesic)
| Property | Value | Relevance to local injection |
|----------|-------|------------------------------|
| pKa | 7.66 | Slightly acidic; can be formulated as a salt (ketamine hydrochloride) for aqueous solutions. |
| LogP | ~1.9–2.4 | Moderately lipophilic – good tissue penetration but not overly hydrophobic, so systemic absorption is moderate. |
| Solubility | 0.3 g/mL in water (as HCl salt) | Adequate for IV or local injection; may need dilution with saline or use of buffered solution. |
| pH of injectable | 6–7 | Compatible with skin/soft tissue, minimizing irritation. |
| Stability | Stable at neutral to slightly acidic pH; degrade above pH 9 or below pH 4. |
**Implications for local anesthesia:**
- **Local efficacy:** Adequate penetration into nerve tissues without excessive systemic diffusion.
- **Safety profile:** Mild skin irritation potential due to moderate acidity/alkalinity, but generally acceptable for topical or subcutaneous use.
- **Formulation considerations:** Use of buffered saline (pH 6–7) or mild acidic vehicle; avoid extreme pH which could cause tissue damage.
---
## 4. Comparison with Other Anesthetics
| Property | 2‑Bromopropane | 1‑Methylcyclohexane | Isoflurane | Lidocaine (topical) |
|----------|-----------------|---------------------|------------|---------------------|
| **Boiling Point** | ~ -46 °C | ~ 82 °C | ~ 48 °C | ~ 98 °C |
| **Solubility in Water** | Very low (<0.1 %) | Very low (<0.01 %) | Low (~1–2 %) | High (~3 % at pH 7) |
| **Odor** | Slightly pungent | Odorless | Mild | Strong |
| **Toxicity (LD50)** | ~ 3000 mg/kg (oral) | ~ 1500 mg/kg | ~ 1200 mg/kg | 100–200 mg/kg |
| **Flammability** | Flammable (flash point ~-20°C) | Flammable (flash point -60°C) | Flammable (flash point 12°C) | Non‑flammable |
---
## 4. Practical Implications for the Project
| Consideration | Why it matters | Recommendation |
|---------------|----------------|----------------|
| **Availability** | The project is a proof‑of‑concept; we need a source that delivers consistent purity and quantity. | Use an established supplier (e.g., Sigma‑Aldrich, Alfa Aesar). |
| **Purity & Stability** | Degradation products can interfere with analysis or sensor readings. | Require ≥ 99 % purity; confirm via NMR/IR if possible. |
| **Handling & Safety** | Must fit within a standard lab setting (no need for specialized cryogenic or inert‑gas equipment). | Choose a stable, low‑toxicity reagent; store at room temperature. |
| **Cost & Availability** | Proof‑of‑concept budgets are tight; bulk purchases may be unnecessary. | Compare unit prices across vendors; consider 1 g or 10 g options. |
---
## Recommended Reagent
| Property | Value | Notes |
|----------|-------|------|
| **Chemical** | *3-Methyl-5-phenylfuran* (also called 3-methyl‑5‑phenyl‑2‑H‑furan) | The simplest furan bearing both a methyl and a phenyl substituent. |
| **CAS No.** | 1090‑12‑8 | Unambiguous identifier for ordering. |
| **Molecular Formula** | C₁₂H₁₀O | |
| **Molecular Weight** | 158.22 g mol⁻¹ | |
| **Physical State** | Colorless liquid (often clear or pale) | |
| **Melting Point** | –42 °C (≈ –43 °C) | |
| **Boiling Point** | ~210 °C (approx.) | |
| **Solubility** | Miscible in most organic solvents; sparingly soluble in water | |
| **Purity for Reactions** | ≥ 99 % (analytical grade) | |
---
## 3. Practical Considerations
1. **Storage** – Keep in a tightly sealed, dark bottle at room temperature or slightly cooler if possible.
2. **Handling** – Use gloves and eye protection; avoid inhalation of vapors.
3. **Reactivity** – Reacts readily with strong acids, oxidants, and bases. In the presence of water it can slowly hydrolyze to benzoic acid and phenol.
4. **Waste** – Dispose of unused or contaminated material in accordance with local regulations; neutralize before disposal if necessary.
---
### Summary
- The compound is **1‑(2‑Hetero‑pyridyl)‑3‑phenyl‑2‑propanone (benzophenone‑5‑pyridine)**.
- It is a ketone used in various chemical syntheses, notably as an intermediate for the production of 4‑chloro‑3‑(5‑pyridinyl)-benzophenone and in pharmaceutical manufacturing.
- Key physicochemical properties: MW ≈ 242 g/mol; logP ≈ 2.8–3.0; melting point ≈ 145 °C; boiling point ≈ 280 °C (decomposes).
This summary provides the essential information needed for handling, storage, and use of the compound in a laboratory setting. - https://git.agusandelnorte.gov.ph/mauricioconnol
